This two-story plan offers 2,910 sq ft of living space, not counting the garage, on a footprint of 43'-4" × 50'-10". The ground floor places a 14'-7" × 6'-4" foyer at the front, with the office (11'-11" × 9'-9") and formal dining room (12'-7" × 10'-11") close by. At the back, the kitchen and family room share a 21'-5" width. The family room is 21'-5" × 19'-10" and the kitchen is 21'-5" × 10'-1".
The 3-car garage (19'-6" × 26'-8") connects to the house through an 8'-6" × 10'-11" mudroom, so daily traffic stays out of the main living areas. A powder room and coat closet sit near the entry. Upstairs, a 31'-1" hall links the primary suite, which has a 12'-3" × 4'-6" walk-in closet and a primary bath. It also links three more rooms: Bedroom 2 with its own bath, Bedroom 3, Bedroom 4 and a loft. A hall bath and the laundry room are on the same level as the bedrooms. The plan has 4 bedrooms and 3.5 baths, with a front porch and rear patio.
Layout highlights
- Family room at 21'-5" × 19'-10" shares the full rear width with the kitchen.
- Kitchen measures 21'-5" × 10'-1" and opens directly to the family room.
- Mudroom (8'-6" × 10'-11") links the 3-car garage to the house.
- Primary bedroom is 21'-5" × 11'-7" wide-plan sized at 21'-5" × 11'-11" with a 12'-3" × 4'-6" walk-in closet.
- Upstairs laundry (11'-9" × 5'-1") sits on the bedroom level beside the hall bath.
Room sizes
| Room | Level | Size | Area |
|---|---|---|---|
| Powder Room | 1 | 2'-11" × 7'-8" | 23 sq ft |
| Coat Closet | 1 | 3'-9" × 3'-7" | 13 sq ft |
| Foyer | 1 | 14'-7" × 6'-4" | 93 sq ft |
| Office | 1 | 11'-11" × 9'-9" | 117 sq ft |
| Stair | 1 | 7'-2" × 9'-9" | 70 sq ft |
| 3-Car Garage | 1 | 19'-6" × 26'-8" | 520 sq ft |
| Family Room | 1 | 21'-5" × 19'-10" | 425 sq ft |
| Kitchen | 1 | 21'-5" × 10'-1" | 217 sq ft |
| Mudroom | 1 | 8'-6" × 10'-11" | 93 sq ft |
| Formal Dining | 1 | 12'-7" × 10'-11" | 138 sq ft |
| Stair | 2 | 6'-4" × 9'-9" | 62 sq ft |
| Primary Bedroom | 2 | 21'-5" × 11'-11" | 256 sq ft |
| Upstairs Hall | 2 | 3'-7" × 31'-1" | 110 sq ft |
| Linen Closet | 2 | 4'-10" × 4'-6" | 22 sq ft |
| Walk-in Closet | 2 | 12'-3" × 4'-6" | 56 sq ft |
| Bedroom 4 | 2 | 17'-6" × 8'-6" | 148 sq ft |
| Loft | 2 | 17'-6" × 8'-6" | 148 sq ft |
| Bedroom 2 | 2 | 17'-6" × 8'-6" | 148 sq ft |
| Laundry | 2 | 11'-9" × 5'-1" | 59 sq ft |
| Bedroom 2 Bath | 2 | 9'-4" × 5'-1" | 47 sq ft |
| Primary Bath | 2 | 6'-4" × 11'-7" | 74 sq ft |
| Hall Bath | 2 | 6'-4" × 8'-10" | 56 sq ft |
| Bedroom 3 | 2 | 6'-4" × 17'-6" | 112 sq ft |
Who this plan suits
This plan suits families who want four bedrooms, a home office and a formal dining room in roughly 3,000 sq ft. It needs a lot that fits a 43'-4" × 50'-10" footprint plus setbacks and a driveway for the 3-car garage.
How this plan was made
It was generated in AI Architectures Plan Studio from this one-line brief: “3,000 sq ft two-story house, 4 bedrooms, 3.5 baths, office, open kitchen and family room, formal dining, mudroom, 3-car garage.” An AI architect drafted the room program, a layout solver placed every wall and door, and the plan was checked automatically for room sizes, circulation and daylight. The same project produced the PDF sheets, layered DXF, IFC model and 3D model you can download above.
Frequently asked questions
What are 3000 sq ft house plans?
They are home designs with about 3,000 sq ft of heated living space, usually with four or more bedrooms. This plan has 2,910 sq ft of living area on two levels, and the garage is not included in that figure.
What affects the cost and lot needs of this plan?
The 43'-4" × 50'-10" footprint sets the minimum lot size once setbacks are added. Site slope, foundation type, finish choices, and local labor and material rates drive the build cost more than the plan alone. A local builder should price it for your site.
Can I change this plan by chat?
Yes. You can ask to resize rooms, swap the garage to the other side, or adjust the plan for a narrower or wider lot. The layout is regenerated so the rooms still connect.
How do I use the PDF, DXF and IFC files?
The PDF is for review and sharing with builders or permit offices. The DXF opens in CAD software for editing drawings, and the IFC loads into BIM tools for 3D work and coordination. Have a licensed professional check the plans against local codes before construction.

