This single-story plan has 2,600 square feet of living space, not counting the garage, within a 70'-6" × 48'-11" footprint. The foyer (14'-8" × 5'-9") leads to the main living area. It has a 35'-8" × 13'-3" great room, a 14'-3" × 14'-1" kitchen with an island and a 10'-4" × 14'-3" dining room. A 9'-8" × 5'-10" pantry supports the kitchen. A front porch and a rear patio extend the living space outdoors.
Bedrooms are split. The primary suite sits apart from the others. It has a 15'-8" × 12'-11" bedroom, a primary hall, an 11'-3" × 6'-8" walk-in closet and a 9'-8" × 11'-7" bath. Bedrooms 3 and 4 (10'-4" × 10'-11" each) and Bedroom 2 (8'-8" × 14'-1", with its own bath) open off a bedroom hall, with a hall bath nearby. An 11'-3" × 10'-9" office, a mudroom (9'-4" × 7'-2"), a laundry room (9'-4" × 6'-8") and the 3-car garage (35'-9" × 14'-3") complete the plan.
Layout highlights
- Great room of 35'-8" × 13'-3" anchors the living space alongside the kitchen and dining room.
- Kitchen of 14'-3" × 14'-1" includes an island and a 9'-8" × 5'-10" pantry.
- Primary suite has a 15'-8" × 12'-11" bedroom, an 11'-3" × 6'-8" walk-in closet and a bath.
- Three more bedrooms use a 14'-11" × 6'-6" hall, with a hall bath and a bedroom 2 bath.
- Mudroom (9'-4" × 7'-2"), laundry (9'-4" × 6'-8") and a 35'-9" × 14'-3" 3-car garage.
Room sizes
| Room | Size | Area |
|---|---|---|
| Bedroom 4 | 10'-4" × 10'-11" | 113 sq ft |
| Bedroom 3 | 10'-4" × 10'-11" | 113 sq ft |
| Bedroom Hall | 14'-11" × 6'-6" | 97 sq ft |
| Foyer | 14'-8" × 5'-9" | 84 sq ft |
| Walk-in Closet | 11'-3" × 6'-8" | 76 sq ft |
| Office | 11'-3" × 10'-9" | 121 sq ft |
| Primary Bedroom | 15'-8" × 12'-11" | 203 sq ft |
| Primary Hall | 15'-8" × 4'-6" | 71 sq ft |
| Primary Bath | 9'-8" × 11'-7" | 112 sq ft |
| Pantry | 9'-8" × 5'-10" | 56 sq ft |
| Bedroom 2 | 8'-8" × 14'-1" | 122 sq ft |
| Hall Bath | 8'-10" × 6'-10" | 60 sq ft |
| Bedroom 2 Bath | 8'-10" × 6'-10" | 60 sq ft |
| Great Room | 35'-8" × 13'-3" | 473 sq ft |
| Kitchen with Island | 14'-3" × 14'-1" | 200 sq ft |
| 3-Car Garage | 35'-9" × 14'-3" | 509 sq ft |
| Dining | 10'-4" × 14'-3" | 147 sq ft |
| Mudroom | 9'-4" × 7'-2" | 67 sq ft |
| Laundry | 9'-4" × 6'-8" | 62 sq ft |
Who this plan suits
This plan suits families who want four bedrooms, a home office and generous garage space on one level, with the primary suite kept apart from the other bedrooms. It needs a lot wide enough for a 70'-6" × 48'-11" footprint plus setbacks.
How this plan was made
It was generated in AI Architectures Plan Studio from this one-line brief: “Single-story house, 4 bedrooms, 3 baths, split bedrooms, open kitchen with island and pantry, great room, office, mudroom, laundry, attached 3-car garage, about 2,600 sq ft of living space (garage not included).” An AI architect drafted the room program, a layout solver placed every wall and door, and the plan was checked automatically for room sizes, circulation and daylight. The same project produced the PDF sheets, layered DXF, IFC model and 3D model you can download above.
Frequently asked questions
What does a 2600 sq ft 4 bedroom house plan include?
This one has 2,600 sq ft of living space on a single level, with 4 bedrooms and 3 baths. It also has a great room, a kitchen with an island and pantry, a dining room, an office, a mudroom and a laundry room. The attached 3-car garage is not counted in the living area.
What affects the lot and building cost of this plan?
The 70'-6" × 48'-11" footprint sets the minimum lot width and depth once setbacks are added. A single-story layout spreads the foundation and roof over more area than a two-story plan of the same size. The 3-car garage, the covered porch and the rear patio also add to the footprint, so local labor, materials and site conditions will drive the final cost.
Can I change this plan by chat?
Yes. You can describe changes in chat, such as adjusting room sizes, switching the garage to the other side or fitting a narrower or wider lot. The plan is then updated to match your request.
How do I use the PDF, DXF and IFC files?
The PDF is for reviewing the plan and sharing it with a builder or contractor. The DXF opens in common CAD programs for drafting and measuring. The IFC is a BIM format that can be imported into compatible modeling software. Have a local professional check the plan against your site and building codes before you build.