This two-story plan puts the living spaces on the ground floor and all three bedrooms upstairs, for 2,250 sq ft of living area not counting the garage. The footprint measures 47'-7" × 32'-10". From the front porch, the 5'-5" × 13'-7" foyer opens toward the 22'-1" × 16'-10" great room, with the 13'-5" × 9'-0" dining area and the 10'-4" × 13'-7" kitchen alongside. A 7'-4" × 3'-9" pantry sits off the kitchen.
The 2-car garage, 23'-1" × 16'-10", opens into a 7'-4" × 9'-5" mudroom, so groceries and gear stay out of the main rooms. Upstairs, the stair arrives at a hall serving Bedroom 2 (8'-8" × 14'-7"), Bedroom 3 (11'-7" × 10'-8"), a hall bath, a laundry room and an 11'-7" × 10'-5" loft. The primary suite at 20'-11" × 9'-0" includes a 10'-1" × 8'-2" bath and a 7'-4" × 9'-0" walk-in closet.
Layout highlights
- Great room of 22'-1" × 16'-10" anchors the ground floor next to dining and kitchen.
- Kitchen of 10'-4" × 13'-7" has a 7'-4" × 3'-9" pantry beside it.
- Mudroom of 7'-4" × 9'-5" sits between the 2-car garage and the living areas.
- Primary suite pairs a 20'-11" × 9'-0" bedroom with a 7'-4" × 9'-0" walk-in closet.
- Upstairs laundry (8'-2" × 6'-8") and an 11'-7" × 10'-5" loft serve the bedroom hall.
Room sizes
| Room | Level | Size | Area |
|---|---|---|---|
| Stair | 1 | 6'-0" × 9'-0" | 54 sq ft |
| Powder Room | 1 | 6'-0" × 4'-2" | 25 sq ft |
| Foyer | 1 | 5'-5" × 13'-7" | 73 sq ft |
| Dining | 1 | 13'-5" × 9'-0" | 120 sq ft |
| Kitchen | 1 | 10'-4" × 13'-7" | 140 sq ft |
| Pantry | 1 | 7'-4" × 3'-9" | 27 sq ft |
| Mudroom | 1 | 7'-4" × 9'-5" | 69 sq ft |
| Great Room | 1 | 22'-1" × 16'-10" | 373 sq ft |
| 2-Car Garage | 1 | 23'-1" × 16'-10" | 389 sq ft |
| Stair | 2 | 6'-0" × 8'-2" | 50 sq ft |
| Hall Bath | 2 | 8'-8" × 6'-6" | 56 sq ft |
| Bedroom 2 | 2 | 8'-8" × 14'-7" | 126 sq ft |
| Upper Hall | 2 | 8'-2" × 14'-4" | 117 sq ft |
| Laundry | 2 | 8'-2" × 6'-8" | 54 sq ft |
| Loft | 2 | 11'-7" × 10'-5" | 121 sq ft |
| Bedroom 3 | 2 | 11'-7" × 10'-8" | 123 sq ft |
| Primary Bath | 2 | 10'-1" × 8'-2" | 83 sq ft |
| Primary Bedroom | 2 | 20'-11" × 9'-0" | 188 sq ft |
| Walk-in Closet | 2 | 7'-4" × 9'-0" | 66 sq ft |
Who this plan suits
This plan suits households that want living areas downstairs and every bedroom plus laundry on one upper level, with a garage entry that goes through a mudroom. It needs a lot that fits the 47'-7" × 32'-10" footprint plus your local setbacks, with the front porch facing the street.
How this plan was made
It was generated in AI Architectures Plan Studio from this one-line brief: “Two-story house: kitchen, dining, living, powder room, mudroom and 2-car garage downstairs; 3 bedrooms including primary suite, 2 baths and laundry upstairs; about 2,300 sq ft.” An AI architect drafted the room program, a layout solver placed every wall and door, and the plan was checked automatically for room sizes, circulation and daylight. The same project produced the PDF sheets, layered DXF, IFC model and 3D model you can download above.
Frequently asked questions
What are two story house plans?
Two story house plans stack living space on two levels over a smaller footprint than a single-level home of the same size. Here the kitchen, dining, great room and garage are on level 1, and the three bedrooms, two baths, laundry and loft are on level 2.
What affects the cost and lot requirements for this plan?
The main drivers are the 2,250 sq ft of living area, the 2-car garage, the staircase and the 47'-7" × 32'-10" footprint, which is compact for the floor area. Your lot needs to fit that footprint plus local setbacks. Foundation type, finishes and regional labor rates will change the final cost more than the layout does.
Can I change this plan by chat?
Yes. You can describe changes in chat, such as resizing a bedroom, moving the garage to the other side or adapting the plan to a narrower or wider lot. The layout is regenerated so the rooms still connect, and you can review the result before downloading.
How do I use the PDF, DXF and IFC files?
The PDF is for reviewing and sharing the floor plans with family, builders or a permit office. The DXF opens in CAD tools for drafting and measuring, and the IFC loads into BIM software for 3D coordination. A local architect or engineer should review the files before construction.

